Yamaha F30 User Manual (English)

To Next Page

To Previous Page

Operation

3. To return the outboard motor to the nor-

mal running position, press the power

trim and tilt switch and slowly tilt the out-

board motor down.

EMU28196

Cruising in other conditions

Cruising in salt water

After operating in salt water, flush the cooling

water passages with fresh water to prevent

them from becoming clogged. Also rinse the

outside of the outboard motor with fresh wa-

ter.

Cruising in muddy, turbid, or acidic water

Yamaha strongly recommends that you use

the optional chromium-plated water pump kit

(see page 21) if you use the outboard motor

in acidic water or water with a lot of sediment

in it, such as muddy or turbid (cloudy) water.

After operating in such water, flush the cool-

ing passages with fresh water to prevent cor-

rosion. Also rinse the outside of the outboard

motor with fresh water.

ZMU01935

6BG-9-3F-E0.book 74 ページ２０１８年１１月１日　木曜日　午後５時１分

Other manuals for Yamaha F30

Need help?

Do you have a question about the Yamaha F30 and is the answer not in the manual?

General

Engine Type	4-Stroke, SOHC
Prop Shaft Horsepower	30 hp
Full Throttle RPM Range	5000-6000 rpm
Starting System	Electric
Gear Ratio	2.08:1
Lubrication	Wet sump
Gear Shift	F-N-R
Displacement	747 cc
Fuel Induction System	EFI (Electronic Fuel Injection)
Ignition System	TCI
Shaft Length	15 in, 20 in
Steering	Remote
Bore x Stroke	65.0 mm x 75.0 mm (2.6 x 3.0 in.)