Maintenance
82
EMU46073
Maintenance chart 1
Refer to the sections in this chapter for explanations of each owner-specific action.
The maintenance cycle on these charts assume usage of 100 hours per year and regular
flushing of the cooling water passages. Maintenance frequency should be adjusted when
operating the engine under adverse conditions such as extended trolling.
Disassembly or repairs may be necessary depending on the outcome of maintenance
checks.
Expendable or consumable parts and lubricants will lose their effectiveness over time and
through normal usage regardless of the warranty period.
When operating in salt water, muddy, other turbid (cloudy), acidic water, the engine should
be flushed with clean water after each use.
The “ ” symbol indicates the check-ups which you may carry out yourself.
The “ ” symbol indicates work to be carried out by your Yamaha dealer.
Item Actions
Initial Every
Page
20 hours
(3 months)
100 hours
(1 year)
300 hours
(3 years)
500 hours
(5 years)
Anode(s) (external)
Inspection or
replacement as
necessary
94
Anode(s) (internal)
*1
Inspection or
replacement as
necessary
—
Anode(s) (internal)
*2
Replacement —
Battery (electro-
lyte level, terminal)
Inspection 95
Battery (electro-
lyte level, terminal)
Fill, charging or
replacing as nec-
essary
—
Cooling water leak-
age
Inspection or
replacement as
necessary
—
Cowling lock lever Inspection 49, 51
Engine starting
condition/noise
Inspection 55
Engine idle
speed/noise
Inspection 87
Engine oil Replacement 87
Engine oil filter
(cartridge)
Replacement 90
6BG-9-3F-E0.book 82 ページ ２０１８年１１月１日 木曜日 午後５時１分
©2020 Yamaha Motor Corporation
To Next Page
Loading...
Need help?
General
