PSR-S910/S710 Owner’s Manual 23
Starting Up
The display that appears when the power is turned on is the Main display. The Main
display shows the current basic settings such as the currently selected Voice and
Style, allowing you to see them at a single glance. The Main display is the one you’ll
usually see when you play the keyboard.
1 Song name and related information
Displays the currently selected Song name, time signature and tempo. Pressing
the [A] button calls up the Song Selection display (page 49).
2 BAR/BEAT/TEMPO
Displays the current position (bar/beat/tempo) in Style playback or Song
playback.
3 Current chord name
When the [ACMP] button is set to on, the chord specified in the chord section of
the keyboard will be displayed. When the Song containing the chord data is
played, the current chord name will be displayed.
4 Transpose
Displays the amount of transposition in semitone units (page 34).
5 Upper Octave
Displays the amount that the octave value is shifted (page 34).
6 Style name and related information
Displays the currently selected Style name, time signature and tempo. Pressing
the [E] button calls up the Style Selection display (page 39).
7 Voice name
Displays the Voice names currently selected for RIGHT 1, RIGHT 2 and LEFT
parts (page 32). Pressing one of the [F] – [H] buttons calls up the Voice
Selection display for each part.
8 Multi Pad Bank name
Displays the names of the selected Multi Pad Bank. Pressing the [I] button calls
up the Multi Pad Bank Selection display (page 63).
Main Display Configuration
NOTE
Here’s a convenient way to return to
the Main display from any other dis-
play: Simply press the [DIRECT
ACCESS] button, then the [EXIT] but-
ton.
1
!#
7
9
8
)
2
3
4
6
5
@
To Next Page
Loading...
Need help?
General
