Yamaha PSR-S710 User Manual

PSR-S910/S710 Owner’s Manual 81
Mixing Console – Editing the Volume and Tonal Balance –
8
You can change the Voice and adjust panning and volume for each keyboard part,
Style channel or Song channel.
1 Same operation as in the “Basic Procedure” on page 79. In step
2, select VOL/VOICE tab.
2 Press the [C] (or [H]) button to select the VOICE parameter.
3 Press one of the [1 ▲▼] – [8 ▲▼] buttons to select the desired
part.
The Voice Selection display appears.
4 Select a Voice.
Press one of the Voice category selection buttons on the panel, then select a
Voice by using the [A] – [J] buttons (page 29).
5 Press the [EXIT] button to return to the MIXING CONSOLE
display.
6 Save your settings (step 5 on page 80).
Changing Voices and Adjusting Panning/Volume for Each Part
Changing the Voice for each part
22
3
NOTE
• Some Voices (such as Organ
Flutes) cannot be selected for Style
channels.
• The RHY2 channel in the STYLE
PART display can only be assigned
Drum kit Voices and SFX kit
Voices.
• When playing GM Song data, chan-
nel 10 can only be used for a Drum
kit Voice.

Yamaha PSR-S710 Specifications

General

Music Finder	Yes
One Touch Setting (OTS)	4 for each Style
Playback	SMF (Format 0 & 1), XF
Weight	11.5 kg
Polyphony	128
Featured Voices	Live! Voices, Sweet! Voices, Cool! Voices
Effects	Reverb, Chorus, DSP, EQ
Styles	Over 300
Featured Styles	Session, MegaVoice
Fingering	Single Finger, Fingered, Fingered On Bass, Multi Finger
Style Control	Intro, Main, Ending
Song Recording	Yes
Recording	SMF (Format 0)
Display	320 x 240 dots LCD
Connectivity	USB TO DEVICE, USB TO HOST, MIDI IN/OUT
Power Supply	PA-300 or equivalent
Internal Memory	approx. 1.4 MB
Speakers	12 cm x 2 + 5 cm x 2