3-7
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
Seat<IXE>
Helmet holder<IXE>
EAU14300
Helmet holder
1
ZAUM00**
1. Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-7.)
2. Attach the helmet to the helmet
holder, and then securely close the
seat.
EWA10160
w
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU13932
Seat
To open the seat
1. Place the scooter on the
centerstand.
2. Insert the key into the main switch,
and then turn it counterclockwise
to “OPEN”.
ZAUM00**
NOTE:
Do not push inward when turning the key.
3. Fold the seat up.
To close the seat
1. Fold the seat down, and then push
it down to lock it in place.
2. Remove the key from the main
switch if the scooter will be left un-
attended.
NOTE:
Make sure that the seat is properly se-
cured before riding.
5YR-F8199-14_ch3.pmd 2007/05/21, 17:407
To Next Page
Loading...
Need help?
General
