6 Mechanical Installation
YASKAWA TOEPC7106171FD FP605 DRIVE INSTALLATION & PRIMARY OPERATION 17
A - 50 mm (2 in) minimum
B - 2 mm (0.08 in) minimum
C - 2 mm (0.08 in) minimum
D - 300 mm (11.8 in) minimum
E - 120 mm (4.7 in) minimum
Figure 6.3 Installation Distances for More than One Drive (Side-by-Side)
Note:
Align the tops of drives that have different dimensions to help when you replace cooling fans.
Figure 6.4 IP20/UL Type 1 Drives Installed Side-by-Side
■ Installing More than One Drive Adjacent to Each Other without Derating
Use the clearances specified in Figure 6.5. Make sure that there is sufficient space.
To Next Page
Loading...
Need help?
General