Yealink CP925 User Manual

Call Features
31
call recording in the country where you are.
It is also very important to inform all the call parties that you are recording and ask for their consent before recording the con-
versation.
Before You Begin
Make sure that the USB flash drive has been connected to your phone.
Procedure
1.
During a call, select > Start REC.
The phone screen displays a recording icon and recording duration.
Pausing/Resuming a Recording
When you do not want the current sensitive information to be recorded, you can pause the recording.
After pausing, you can resume it at any time and the recording continues and will be saved in the same file.
Procedure
1.
Select >Pause REC to pause a recording.
The pause recording icon appears on the phone screen and the duration stops counting.
2.
Select >Resume REC to resume a recording.
Note: If you hold the call during the recording, none of the parties will be recorded until you resume the call.
Stopping a Recording
You can stop recording a call before the call ends. The recording also stops when the active call ends. The record-
ing will be saved as a "*.aac" file in the USB flash drive automatically.
Procedure
1.
Do one of the following:
l
Select > Stop REC.
The recording icon and recording duration disappears. The screen prompts a message that the call is recor-
ded successfully.

Yealink CP925 Specifications

General

Control type	Touch
Product type	IP conference phone
Product color	Black
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	4 \
Bluetooth version	4.2
Display resolution	480 x 800 pixels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
USB version	2.0
USB connector type	USB Type-C
RJ-45 ports quantity	1
Power consumption (typical)	11 W
Storage temperature (T-T)	-10 - 40 °C
Storage relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	289.5 mm
Width	285 mm
Height	59.1 mm