Yealink CP925 User Manual

Using the CP Wireless Microphone CPW25 (Coming Soon)
75
Registering the CPW25 with another Phone
When you no longer want to register with the current phone, you can register the CPW25 with another phone.
CPW25 can only be registered with one phone at a time, if you register the CPW25 to another phone, the CPW25
will deregister from the previous phone automatically.
Procedure
1. Go to More > MIC.
2. Turn on Bluetooth MIC.
3. Select OK when the phone prompts you that turning on the Bluetooth microphone will turn off Bluetooth.
4.
Select to search for CPW25.
5.
Put the CPW25 on the charging cradle or connect to the charging cable and make sure it is charging.
6.
Long tapthe on the CPW25 for 5 seconds.
The CPW25 enters the registration mode. And the mute LED indicator on the CPW25 fast flashes yellow.
The CPW25 registers with the phone automatically.
Unregistering the CPW25
When you no longer need the CPW25 as the external audio input device, you can unregister it.
Procedure
1. Go to More > MIC.
2. Select the desired microphone and then select Detail.
3. Select Unbind.
Muting or Unmuting the CPW25
During the call, you can mute or unmute the CPW25 at any time.
Procedure
1.
Tap to mute the call.

Yealink CP925 Specifications

General

Control type	Touch
Product type	IP conference phone
Product color	Black
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	4 \
Bluetooth version	4.2
Display resolution	480 x 800 pixels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
USB version	2.0
USB connector type	USB Type-C
RJ-45 ports quantity	1
Power consumption (typical)	11 W
Storage temperature (T-T)	-10 - 40 °C
Storage relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	289.5 mm
Width	285 mm
Height	59.1 mm