Yealink SIP-T26P User Manual

User Guide for the SIP-T26P IP Phone
90
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 30 for more information.).
- Press the Dir soft key, and then select History. Select the desired list and use
or to select the entry (Directory should be configured in advance.Refer to
Directory on page 30 for more information.).
- Press the Dir soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory and remote phone book should be
configured in advance. Refer to Directory on page 30 and Remote Phone Book
on page 42 for more information.).
3. Press or to dial out.
4. Press or the Tran soft key to complete the transfer when receiving the
ringback.
To perform an attended transfer:
1. Press or the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Dir soft key, and then select Local Directory. Select the desired group,
and search for the contact (Directory should be configured in advance. Refer to
Directory on page 30 for more information.).
- Press the Dir soft key, and then select History. Select the desired list and use
or to select the entry (Directory should be configured in advance.Refer to
Directory on page 30 for more information.).
- Press the Dir soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory and remote phone book should be
configured in advance. Refer to Directory on page 30 and Remote Phone Book
on page 42 for more information.).
3. Press or to dial out.
4. After the party answers the call, press or the Tran soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call while there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g