Advanced Phone Features
123
The SIP-T26P IP phone supports MWI feature when receiving a new voice message. If
someone leaves you a voice mail, you will receive a message waiting indicator. MWI
will be indicated in three ways: a warning tone, an prompt message (including a voice
mail icon) on the LCD screen, and the MESSAGE key LED illuminates solid green. This
will be cleared when you retrieve all voice mails or delete them.
The MWI service is unsolicited for some servers, so the SIP-T26P IP phone only handles
the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T26P IP phone must enable subscription for MWI.
Note
The MWI Subscription parameters you need to know:
Enable or disable a subscription for MWI service.
Period of MWI subscription. The IP phone sends a
refresh SUBSCRIBE request before initial SUBSCRIBE
expiration.
Subscribe MWI to Voice
Mail
Enable or disable a subscription to the voice mail
number for MWI service. To use this feature, you should
configure subscribe for MWI and the voice mail number
in advance.
Note
To configure subscribe for MWI via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select Enabled from the pull-down list of Subscribe for MWI field.
MWI service is not available on all servers. Contact your system administrator for more
information.
The phone will send SUBSCRIBE messages for the MWI service to the account or the
voice number MWI service depending on the server. Contact your system administrator
To Next Page
Loading...
Need help?
General
Weight and Dimensions
