Yealink SIP-T26P User Manual

Advanced Phone Features
103
This chapter provides operating instructions for the advanced features of the SIP-T26P IP
phone. Topics include:
 Busy Lamp Field (BLF)
 BLF List
 Call Recording
 Hot Desking
 Intercom
 Multicast Paging
 Music on Hold
 Messages
If you require additional information or assistance with your new phone, contact your
system administrator.
You can use BLF to monitor a specific line for status changes on the phone. For example,
you can configure a BLF key (memory key) on the phone to monitor the status of a
friend’s line (busy or idle). The BLF key LED illuminates solid red when the friend's line is
in use. For more information on BLF key LED indications, refer to LED Instructions on page
4.
You can press a BLF key to dial out the monitored phone number when the monitored
line is idle. You can receive a visual or/and an audio alert (if enabled), and also pick up
calls that are received on the monitored line. For more information, contact your system
administrator.
To configure a BLF key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select BLF from the Type field.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g