Advanced Phone Features
107
monitored user receives an incoming call. For more information, refer to Busy Lamp Field
(BLF)section on page 103.
Note
You can record calls by pressing a record key on the phone. The SIP-T26P IP phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends SIP INFO message containing a specific header “Record:
on/off” to trigger a recording.
URL Record: The phone sends HTTP URL request to trigger a recording. Contact
your system administrator for the predefined URL.
Note
To configure a record key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Record from the Key Type field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL record key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
Call record is not available on all servers. Contact your system administrator for more
information.
The pickup code is used in the following order of preference:: BLF List Code
(Account->Advanced)>Directed Call Pickup Code (Account->Advanced)>Directed
Call Pickup Code (Features->Call Pickup). If all of them are not configured, pressing the
BLF List key will directly call the monitored user when he/she receives an incoming call.
For more information about pickup Code, refer to Call Pickup on page 95.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
