Yealink SIP-T26P User Manual

Customizing Your Phone
65
For more information on the valid values for the Account field, refer to Replace Rule
on page 61.
4. Click Confirm to accept the change.
Note
You can block specific numbers from being dialed on your phone. When you dial a
block out number on your phone, the dialing will fail and the LCD screen will prompt
“Forbidden Number”. You can add 10 block out rules at most on your phone.
To add a block out number via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
The default values of minimum and maximum length are 1 and 15 respectively.
Area code is configurable via web user interface only.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g