Yealink SIP-T26P User Manual

Basic Call Features
81
Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n"
indicates the number of missed calls) will appear on the LCD screen.
Note
To activate DND in the custom mode for a specific account:
1. Press the DND soft key when the phone is idle.
The LCD screen displays a list of the accounts on the phone.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or soft key to select On to activate DND.
4. Press the Save soft key to accept the change.
If you activate DND for the default account, the associated line icon will change
to , and the icon will appear on the status bar.
Incoming calls on this line will be rejected automatically and "n New Missed Call(s)"
("n" indicates the number of missed calls) will prompt on the LCD screen.
Note
When DND and busy forward are enabled in phone mode, calls will be sent to the
configured destination number. For more information on busy forward, refer to Call
Forward on page 83.
When DND and busy forward are enabled for a specific account, calls from the specific
account will be sent to the configured destination number. For more information on busy
forward, refer to Call Forward on page 83.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g