User Guide for the SIP-T26P IP Phone
44
1. Press Menu->Dir->Remote Phone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Book to
enter the remote phone book.
2. Select the desired remote group, and then press the Enter soft key to load the
remote phone book.
3. Press the Search soft key.
4. Enter a few continuous characters of the contact name or continuous numbers of the
contact number using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can dial from the result list.
To place a call from the remote phone book:
1. Press Menu-> Dir-->Remote Phone Book.
If Remote Phone Book is added to the directory, press Dir->Remote Phone Book to
enter the remote phone book.
2. Press or to select the desired remote group, and then press the Enter soft
key to load the remote phone book.
3. Select the desired contact in the remote phone book.
4. Press the Send soft key.
In addition, you can enable the phone to present the caller identify stored in the remote
phone book when receiving a call.
To enable the presentation of caller identify stored in a remote phone book via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Incoming/Outgoing Call lookup.
3. Enter the desired refresh period in the Update Time Interval(Seconds) field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
