Basic Call Features
79
Other calls can be made and received while placing the original call on hold. When you
place a call on hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1. Press or the Hold soft key during a call.
The LCD screen indicates that the call is on hold and the line key LED flashes green.
Note
To resume a held call:
1. Press or the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press or to switch between the calls, and then press the Resume soft key
to retrieve the desired call.
- Press the corresponding line key to retrieve the desired call.
A numbered prompt appears on the LCD screen, for example “2/3”, indicating that this
is the second call out of three calls.
You can use DND to reject incoming calls automatically on the phone. The prompt
message "n New Missed Call(s)" ("n" indicates the number of missed calls) will appear
on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is enabled are logged to your missed calls list.
Note
You can enable/disable DND for the phone system, or you can customize DND for each
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.
The prompt message will display when Missed Call Log for the line is enabled. Missed
Call Log is configurable via web user interface at the path Account->Basic.
Do Not Disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
