Yealink SIP-T26P User Manual

Basic Call Features
97
To pick up a call directly:
1. Pick up the handset and press the more soft key.
The DPickup soft key appears on the LCD screen.
2. Press the DPickup soft key on your phone when the target phone receives an
incoming call.
3. Enter the phone number which is receiving an incoming call.
4. Press the DPickup soft key again.
The call is answered on your phone.
You can also configure a DSS key as directed pickup key via phone user interface or
web user interface. Once configured, you can pick up a call by pressing the directed
pickup key directly.
Group Call Pickup
To enable group call pickup via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Click Confirm to accept the change.
To configure the group call pickup code on a global basis via web user interface:
1. Click on Features->Call Pickup.

Yealink SIP-T26P Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	45
Number of handles included	1 pc(s)
Touchscreen	-
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	- entries
Number of VoIP accounts	3
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g