Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
94
To join a Skype conference by dialing the conference dial-in number:
1. Dial the conference dial-in number (e.g., 15915).
2. Enter the Conference ID (e.g., 5493566), and then press to join the Skype
conference.
More participants can repeat steps 1-2 to join the Skype conference.
For more information on managing the Skype conference participants, refer to
Managing the Conference Participants on page 121.
You can configure your phone to forward incoming calls to another party or voice
mailbox through static forwarding. You can also forward incoming calls manually while
your phone is ringing, refer to Dynamic Forwarding.
SIP-T42G IP phone supports the following static forwarding ways:
 Forward to Voice Mail: Incoming calls are forwarded to voice mailbox.
 Forward Calls to Number: Incoming calls are forwarded to the preset number.
 Simultaneously Call: The preset number will ring simultaneously when the phone
receives an incoming call.
To enable call forward:
1. Press Menu->Features->Call Forward.
2. Depending on your selection:
a) If you select Forward to Voice Mail, and then press the OK soft key.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm