Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
72
Delay Time for Dial-Now Rule
You can configure the delay time for dial-now rules. That is, you can configure your
phone to automatically dial out the phone number which matches a dial-now rule, after
the designated delay time.
To configure the delay time for dial-now rule via web user interface:
1. Click on Features->General Information.
2. Enter the time between 1 and 14 (seconds) in the Time-Out for Dial-Now Rule field.
3. Click Confirm to accept the change.
For example: when you enter the number “1234” using the keypad, the phone will
dial out “1234” automatically after 1 second without pressing any key.
Note
You can enable live dialpad on the SIP-T42G IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also
configure a delay, and then the phone will dial out the phone number automatically
after the designated period of time. The delay time is configurable on the Skype for
Business Server only.
Delay time for dial-now rule is configurable via web user interface only.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm