Yealink SIP-T42G User Manual

User Guide for the SIP-T42G IP Phone
116
Group call pickup is used for picking up incoming calls within a pre-defined group. If the
group receives many incoming calls at once, the user will pick up the first incoming call,
by dialing the group pickup code. This feature depends on support from a Skype for
Business Server.
Note
To use group pickup via phone user interface:
1. Enter the group pickup code (e.g., #505) on your phone when a phone number in
your group receives an incoming call.
2. Press the Send soft key.
The call is answered on your phone.
This chapter provides basic operating instructions for managing Skype for Business
conference. You can initiate a Skype for Business conference call on your phone or on
the Skype for Business client. You can view the conference participants. And you can
also manage the conference participants (e.g., promote or demote conference
participants, enable or disable announcements).
You can initiate a Skype for Business conference call on your phone or on the Skype for
Business client.
Note
You can join a Skype conference from the calendar. For more information, refer to
Joining Skype Conferences from the Calendar on page 91
Group and group pickup code are configurable on the Skype for Business Server
only. Contact your system administrator for more information.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm