YOKOGAWA Centum-XL User Manual

3. Scope of Upgrade
3-1
TI 33K01B10-50E
3. Scope of Upgrade
3.1 Applicable Existing System
Hardware
FCS
When upgrading in the following control stations, make sure to replace the SCN / I/O nest / SIO-
system I/O cards with the FCU / Node unit / FIO-system I/O modules of CENTUM VP.
• CENTUMV:CFCS2,CFCD2,CFSS,CFSD,CFMS2,CFCDE
• CENTUM-XL:EFCS,EFCD,EMCS,EMCD,EFMS,EFCE
After the upgrade, you can continue to use the following devices and you are not required to
changetheirexistingeldwiring:
• SCcardandSCnest
• Terminalboard,terminalblock,relayboard
• WiringbetweenI/OcardandSCnest,I/Ocardterminalboard,terminalblock,wiring
between relay boards
• Fielddeviceandwiring
• FCScabinet,partofthefansandpowersource/busassembly
Package Software
If the following package software is used in the existing system, the applications must be rebuilt
during upgrade:
• SEBOL
• Recipemanagement
• FUZZY(*1)
• STC
• PREDICTROL(*1)
• XL-Batch
• Externalrecorderoutput
• Subsystemcommunications
• Voiceoutput
• Superwindow
• Extendedfunctionkey
*1: These functions are not supported on CENTUM VP.
Mar. 27, 2015-00

YOKOGAWA Centum-XL Specifications

General

Brand	YOKOGAWA
Model	Centum-XL
Category	Industrial Equipment
Language	English