YOKOGAWA DX1012 User Manual

43
IM 04L41B01-02E
Setup Example 10: Automatically Transferring the Measured Data File to an FTP Server
In this example, we will configure the DX so that the measured data is automatically
transferred to an FTP server on the network when the measured data is automatically
saved to the CF card. To automatically transfer the measured data files and report files,
the auto saving of the measured data must be configured in advance (“Data storage
method” of Example 5).
This example assumes that the following network environment is used: DHCP enabled,
automatically obtain the DNS server information, and automatically register the DX host
name to the DNS server. Set the parameters according to your network environment.
DX
Measurement input
Ethernet
Automatic data transfer to an FTP server
CF card
FTP server
Internal
memory
Setup Item Description Number in the Figure
Host name DAQSTATION1 1
Obtain the IP address Obtain automatically (DHCP) 2
Type of data to be transferred Acquired measured data 3
FTP server Server name abcdefg.co.jp 4
Port number 21
Login name ftpuser1
Password a1234
(1) IP Address of the DX
Press MENU (switch to the setting mode), hold down FUNC for 3 s (switch to the
basic setting mode)
From the basic setting menu, select: Communication (Ethernet) > IP-address
2
Automatically obtain the DNS server information.
Automatically register the DX host name to the
DNS server.
(2) Host Settings Address of the DX
From the basic setting menu, select: Communication (Ethernet) > Host settings
1
Connecting to an Ethernet Network

YOKOGAWA DX1012 Specifications

General

Brand	YOKOGAWA
Model	DX1012
Category	Voice Recorder
Language	English