YOKOGAWA DX1012 User Manual

8 IM 04L41B01-02E
DX System Configuration
The DX can be used to configure a system as shown below.
Referenced sections are of the
DX1000/DX1000N User’s Manual .
Referenced pages are of this manual.
* : Option
Ethernet
(Communication Interface User's Manual)
USB port*
Alarm output*
Sec 3.5-3.8
Serial communication*
(Communication Interface
User's Manual)
Transmitter power supply*
Page 54
PC
PC
DX
Recorder
Temperature
controller
FAIL/status output*
Sec. 2.9
USB flash memory
Sec. 2.12
Keyboard
Sec. 2.11
Signal input
Sec. 3.3
Pulse input*
Sec. 3.10
Remote input*
Sec. 7.1
Remote Terminal*
Sec. 2.10
CF card
Page 22
Keys
Terminology
• Memory sample
The operation of recording measured data.
• Memory start
The operation of starting the memory sample.
• Memory stop
The operation of stopping the memory sample.
• Display data
The waveform data shown on the DX display. The data recorded at the sampling
interval for the displayed data.
• Event data
Measured data recorded at a sampling interval separate from that of the display data.
Introduction to Functions

YOKOGAWA DX1012 Specifications

General

Brand	YOKOGAWA
Model	DX1012
Category	Voice Recorder
Language	English