30 IM 04L41B01-02E
Setting the Data Storage
Setup Example 5: Continuously Record Measured Data and Automatically Save
In this example, we will continuously record and save the measured data of channel 1 and 2.
For the procedure to set the channel, see “Setting the Input Range and Alarm” on page 26.
For the procedure to set groups, see “Setting the Display” on page 28.
Automatically save to
the CF card periodicall
Channel 1
Channel 2
Setup Item Description Number in the Figure
Source channels Channel 1 (TI-001) and channel 2 (FI-002) 1
Data to be recorded Continuously record the display data from 2
the start of the measurement.
Data storage method Automatically store every 24 hours. 3
Sampling interval 4 seconds. Set using the trend update interval. 4
Sampling interval = (trend update interval setting)/30 dots
Data file name Add “sample” to the file name. 5
Example: 000123_sampleYYMMDD_HHMMSS0.DAD
↑↑
Sequential number Date/Time of the first recorded data and 0 (zero)
Save Destination Directory
DATA-101 6
(1) Data to be Recorded
Press MENU (switch to the setting mode), hold down FUNC for 3 s (switch to the
basic setting mode)
From the basic setting menu, select: A/D, Memory
2
(2) Method of Storing to the CF Card (Auto Save ON/OFF)
From the basic setting menu, select: Environment > Security, Media save
3
To Next Page
Loading...
Need help?
General
