To Next Page

To Previous Page

Applications

Photo Settings

In Photo mode, photo settings appear on screen. Touch to display the photo settings options.

Rear Camera

• Flash - Select whether the camera relies on its light meter to decide whether a flash is necessary, or to turn

it on or off for all shots.

• Off - Disable flash.

• Auto - Adjust flash automatically depending upon light meter (default).

• On - Enable flash upon taking a photo.

• Torch - Turn flash on continuously.

• GPS location - Turn On or Off (default).

• Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M pixels,

HD 1080, 2M pixels, 1.3M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.

• Picture quality - Set the picture quality setting to: Low, Standard (default) or High.

• Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.

• Storage – Set the location to store the photo to: Phone or SD Card.

• Face Detection - Select to turn face detection Off (default) or On.

• ISO - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800

or ISO1600.

• Exposure - Set the exposure settings to: +2, +1, 0(default), -1 or -2.

• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most

natural-looking colors:

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Focus mode - Set the camera focus to CAF (Continuous Auto Focus).

• ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled).

Front Camera

• GPS location - Add GPS location information to the photo meta-data. Options: On or Off (default).

• Picture size - Set the size (in pixels) of the photo to: 1.3M pixels (default), HD720, 1M pixels, WVGA,

VGA, or QVGA.

• Picture quality - Set picture quality setting to: Low, Standard (default) or High.

• Countdown timer - Set to: Off (default), 2 seconds, 5 seconds or 10 seconds.

• Storage – Set location to store the photo to: Phone or SD Card.

Zebra TC70 Series User Manual

Questions and Answers: