MAINTENANCE INSTRUCTIONS
A 167 A 168 A 169
∗ FRONT PTO GEARBOX
1. Opening for filler.
2. Opening for greasing of front cardan
shaft joint.
3. Condensed water and impurity drain-
ing plug.
4. Oil inspection plug
Openings 1, 2 are accessible after side
shield removing.
5. Oil draining plug.
Water condensed in space of
clutch sealing cuff must be
removed before every winter
season by removing of plug (B -
3) and several time engaging and
disengaging of PTO shaft. PTO
engaging and disengaging is
done by control lever located on
steering panel.
Pressure air will blow eventual impurities
or condensed water. Reassemble the
plug after its cleaning.
BRAKE FLUID FILLING UP
Maintain the brake fluid level
within 3/4 (max. level) up to 1/2
(min. level) reservoir capacity.
Keep the strict cleanness when
manipulating with brake fluid.
Daily inspect the brake fluid level before
driving. Fill up the brake fluid through the
filler strainer.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
Need help?
General