REAR THREE POINT HITCH
REAR THREE POINT HITCH
Rear three point hitch is intended for attaching of carried or semi-carried agricultural
machines and implements with hitch points of category I and II according to ISO
regulation. Categories are differed on the base of hitch axis length (implement
attachment points distance). This is the distance of lower link joint ball centers at
attached implement. The link axis length is 728 mm for category I and 870 mm for
category II. The inner opening of lower link ball is 28 mm equal for both categories
according to ISO regulation. The inner opening of top link ball is 25 mm.
The three point hitch consists of:
1. Top link.
2. Left lift link.
3. Right adjustable lift link.
4. Lower draft link stabilizers.
5. Lower draft links.
The extended lower link supports are assembled as the standard at tractors Z 6321
to Z 7341, those enable fixing of lower links and their stabilizers. The narrow lower
link supports - category I as the standard or ∗ extended lower link supports are
assembled at tractors Z 3321 to Z 5341.
Non authorized persons who are not charged to handle the attached tractor
implements must not be left between tractor and attached implement. Do not
park the tractor with lifted implement.
A 110
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
Need help?
General