HYDRAULIC SYSTEM
A 102
CONTROL POSITION MODE SELECTION LEVER
Lever has three positions marked by P, M, D:
P - Position control - Implement attached in the three point hitch is automatically
maintained in the constant position with regard to the tractor.
M - Mix control - is a combination of position and draft control. This is suitable
especially for ploughing at soils with various resistance.
D - Draft control - Implement attached in the three point hitch is automatically
readjusted depending upon the soil resistance change.
All position controls enable also work with implement having the supporting wheel in
so called floating (free) position.
The control position mode se-
lection lever must be moved into
P position when transporting im-
plement.
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
Need help?
General