SJ-20200714160642-002 | 2020-07-27(R1.0)
1.
On the main page of the ZXHN H2640, select Internet > WAN > SFP/Ethernet to
the Ethernet Connection page, see Figure 4-9.
Figure 4-9 Ethernet Connection page
Table 4-2 lists the new item parameters.
Table 4-2 Parameter Descriptions for the DSL
The connection type includes Routing and Bridge Connection.
In this case, Routing is selected.
Options: INTERNET, TR069, VoIP, IPTV.
This parameter must be consistent with service configuration.
For example, if INTERNET is selected, it indicates that the WAN
connection supports the Internet access service only. If TR069 is
selected, it indicates that the WAN connection supports remote
management.
Define the maximum transfer unit.
To Next Page
Loading...
Need help?
General
