55Dialog 4224 Operator
Service Features
Dial tone ordering
An extension calls the terminal and requests an external metered
line.
Ask the caller to hold the line.
&
Press.
z Dial the code to get an external line.
Dial tone.
ê
Press to extend the call.
The line is extended and the terminal is cleared.
Recall from a metered call
All metered calls are recalled to the operator on completion so the
operator can read the meter.
Display example:
ê
Press.
Note the number of pulses and the extension number/name.
&
Press.
The last display row changes to show the external number.
Note the external number.
Ò < Clear Press.
The call metered is zeroed and the terminal is cleared.
Note: External numbers with a maximum of 20 digits can
be read. If you press the meter key once again, the display
switches to shows the number of metered pulses again.
C= 1 I= 0 RECALL METER
EXTENSION
206
BOB BURNES
76 15:25
To Next Page
Loading...
Need help?
General