Extending
Dialog 4224 Operator36
Extending
This chapter describes how to extend calls to extensions,
operators, paging units and external lines.
Free extension
To transfer a call displayed on the left side to an extension.
z Dial the extension number.
The right side of the display shows
EXTENSION FREE and the
called extension’s number and name.
ê
Press to extend the call.
The call is extended and the terminal is cleared.
Note: If the terminal is set to automatic extending mode,
the call is automatically extended after the last digit of the
extension number is dialed and the terminal is cleared.
To Next Page
Loading...
Need help?
General