EasyManuals Logo
Home>ABB>Industrial Equipment>2 Series

ABB 2 Series User Manual

ABB 2 Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40 “Operation and installation manual” - “Terra 360 Series 2 - CE
EN
5.1.3 Open the sides doors - Terra 60
Upper right door (D) Upper left door (D)
Turn the 2 latches (F) and open the upper right
door (D).
Turn the 2 latches (O) and open the upper left
door (L).
D
F
L
O
5.2 Close the doors - Terra 60
HAZARDOUS VOLTAGE
Make sure that only qualified persons have access to the door key.
NOTE
There is one unique door key for each EVSE.
In order to close the doors of the EVSE, repeat the operations described in the “Open doors paragraphs” in
reverse order.
5.3 Internal covers on the AC section - Terra 60
A
B
To access the AC section, located on the lower front
side, is necessary to remove the lexan protective
barriers:
Unscrew the fastners on the protective barrier (A) and
remove it.
Unscrew the fastners on the protective barrier (B) and
remove it.
NOTE
The protection (B) is not installed by
factory (is supplied and located on the rear
internal side of the EVSE.
Once the protections have been removed, it is possible
to fully access the AC section of the EVSE.
HAZARDOUS VOLTAGE
Do not turn on the EVSE without the
protective barriers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB 2 Series and is the answer not in the manual?

ABB 2 Series Specifications

General IconGeneral
BrandABB
Model2 Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals