ABB 2 Series User Manual

8 “Operation and installation manual” - “Terra 360 Series 2 - CE”
EN
2. Safety
This chapter contains the safety instructions which must obey during installation, commissioning, operation
and maintenance of the equipment. Always obey and follow the reading order of instruction exactly as
described in this manual to prevent injury or damage to the equipment.
The manufacturer accepts no liability for failure to comply with the instructions for a correct installation and
cannot be held responsible for any other upstream or downstream equipments.
The instructions provided in the manual do not replace:
• the safety devices
• the technical and operative data labels on the product
• the safety regulations in force in the country of installation
NOTE
The operators must read and comply with the technical information and instruction provided in
the manual and in any additional attached documentation.
Chapter recipients:
• Owner
• Qualified installer
• User
2.1 Liability
The manufacturer declares that the equipment complies with the regulations currently in force in the country
of installation and has issued the corresponding declaration of conformity.
The manufacturer is not liable for damages, losses, costs or expenses incurred by any user of the EVSE (e.g.
the installation engineer or owner of the equipment) if such damages, losses, costs or expenses result from a
failure to comply with the applicable safety instructions given by the manufacturer, including, but not limited
to, the following:
• Comply with the local rules and the instructions in this manual. If the local rules contradict the instructions
in this manual, the local rules must be applied.
• Power outages or disruptions to the electrical supply to the equipment.
• Accumulation of dirt or ingress of foreign substances within the equipment.
• Corrosion of component parts.
• Damage to software or hardware due to any IT security problem, such as but not limited to a virus breakout
or malicious hacking of the system.
• Damage or failure of equipment caused by vermin, insect infestations or the like.
• Damage or failure resulting from faults in some other equipment connected to the EVSE.
• Damage or loss caused by hazards such as fire, flood, storm or the like or spillage or leakage of chemicals or
harmful substances onto the equipment.
• Fault tracing caused by problems from a source external to the scope of work.

ABB 2 Series Specifications

General

Brand	ABB
Model	2 Series
Category	Industrial Equipment
Language	English