AGCO FENDT 1050 Vario S4 User Manual

3.3.13 Fault code 0E.1.00 -
Fault code
DIN brief description Cause Consequences Remedy
0E = VarioGuide 0, 1, 2 = fault weighting (0 = heavy, 1 = medium; 2 = light)
01... = sequential number The sorting of the error code is based on the serial number
0E.1.00
A102 VarioGuide GNSS ECU
Unknown fault Track guidance not
working
Restart system
0E.1.01
A102 VarioGuide GNSS ECU
U004 GNSS antenna
Fault: GNSS aerial Track guidance not
working
Check GNSS antenna
0E.1.02
A102 VarioGuide GNSS ECU
Fault: Processor memory Track guidance not
working
Check GNSS antenna
0E.1.03
A102 VarioGuide GNSS ECU
Fault: Internal current supply Track guidance not
working
Check GNSS antenna
0E.1.04
A102 VarioGuide GNSS ECU
Fault: External current supply (for external
modem)
Track guidance not working
0E.1.05
A102 VarioGuide GNSS ECU
Fault: Internal gyro Track guidance not
working
0E.1.06
A102 VarioGuide GNSS ECU
Switch off the automatic steering Activate steering
system
0E.1.07
A102 VarioGuide GNSS ECU
Fault: EHL steering system was not recognized
Check CAN 3
0E.1.08
A102 VarioGuide GNSS ECU
Fault: Radio modem plug-in module Track guidance not
working
3. Faults and remedy
Maintenance 193
530.020.020.011 Rev.A

AGCO FENDT 1050 Vario S4 Specifications

General

Brand	AGCO
Model	FENDT 1050 Vario S4
Category	Tractor
Language	English