• Cleaning cloths, spectacle cleaning cloths and lint-free cloths.
• Clean the display surface with a commercially available microfibre cloth and cleaner for TFT/LCD
displays.
• Dry the display surface with a dry microfibre cloth.
2.18.4 Clean the cab's air spring bellows
To ensure that the cab's pneumatic suspension
functions properly, the air spring bellows (A) and
the area around them must be cleaned if they are
heavily soiled.
Clean with a high-pressure cleaner while
maintaining a distance of at least 10 cm from seals
and paintwork. Maximum water temperature 50°
C.
Do not use a spray booster (dirt cutter).
Fig. 78
2. Service and maintenance
66 Maintenance
530.020.020.011 Rev.A
To Next Page
Loading...
Need help?
General