3.
Press up locking plate (B) and thus unlock
the neutral circuit.
4.
Unlock gear lever (A) and pull it backwards
until the lever clicks into place.
Fig. 130
5.
It may happen that the gearbox will not
switch into neutral because the switching
mechanism is loaded. In this case you need
to jack up at least one front wheel or create
pressure by quickly pumping the auxiliary
pump (arrow) at the rear end of the tractor.
Then you should be able to switch into
neutral.
Fig. 131
6.
Turn the preheat and starter switch to
position I. Display for mechanical neutral
position appears in the multiple display.
Fig. 132
3.4.6.2 Towing
WARNING:
Serious injury or death caused by an uncontrollable vehicle: If the engine is not running,
the hydraulic brake pressure and steering assistance will not function. This means that
when the drive brake is operated, there will be no braking effect and greater effort is
required for steering, which renders the vehicle uncontrollable. This may result in an
accident. If possible, the engine should be running when you are towing. If this is not
possible, ensure that the lack of braking effect and the more difficult steering do not pose
additional hazards for yourself and other road users. Towing is generally permitted only
with use of a tow bar.
3. Faults and remedy
Maintenance 237
530.020.020.011 Rev.A
To Next Page
Loading...
Need help?
General