Agilent Technologies 54853A User Manual

Chapter 2: Setting Up the Oscilloscope
To connect power
2–3
To connect power
1 Position the oscilloscope where it will have sufficient clearance for airflow around the top,
bottom, back, and sides.
2 Position the oscilloscope so that it is not difficult to unplug the power cord.
Figure 2-1
Positioning the Infiniium Oscilloscope with Sufficient Clearance
Minimum 0 mm
Minimum 85 mm
both sides
Minimum 39 mm
Airflow requirements 250 cfm
Minimum 22 mm

Agilent Technologies 54853A Specifications

General

Brand	Agilent Technologies
Model	54853A
Category	Test Equipment
Language	English