257
Cleaning Information
Cleaning Instrument Housings
and dirty the surface of the device. In addition, the characteristics of
your device can be changed and your measurement results affected.
E.5 Cleaning Instrument Housings
Use a dry and very soft cotton tissue to clean the instrument
housing and the keypad. Do not open the instruments as there is a
danger of electric shock, or electrostatic discharge. Opening the
instrument can cause damage to sensitive components, and in
addition your warranty will be voided.
E.6 Which Cleaning Procedure should I use ?
Light dirt
If you just want to clean away light dirt, observe the following
procedure for all devices:
• Use compressed air to blow away large particles.
• Clean the device with a dry cotton swab.
• Use compressed air to blow away any remaining filament left by
the swab.
Heavy dirt
If the above procedure is not enough to clean your instrument,
follow one of the procedures below. Please consult XXXX for the
procedure relevant for this instrument.
If you are unsure of how sensitive your device is to cleaning, please
contact the manufacturer or your sales distributor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
