6DIHW\6XPPDU\
The following general safety precautions must be observed during
all phases of operation of this instrument. Failure to comply with
these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and
intended use of the instrument. Agilent Technologies assumes no
liability for the customer’s failure to comply with these
requirements.
*(1(5$/
This product is a Safety Class 1 instrument (provided with a
protective earth terminal). The protective features of this product
may be impaired if it is used in a manner not specified in the
operation instructions.
All Light Emitting Diodes (LEDs) used in this product are Class 1
LEDs as per IEC 60825-1.
(19,5210(17$/&21',7,216
This instrument is intended for indoor use in an installation category
II, pollution degree 2 environment. It is designed to operate at a
maximum relative humidity of 95% and at altitudes of up to 2000
meters. Refer to the specifications tables for the ac mains voltage
requirements and ambient operating temperature range.
%()25($33/<,1*32:(5
Verify that the product is set to match the available line voltage, the
correct fuse is installed, and all safety precautions are taken. Note
the instrument’s external markings described under Safety Symbols.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
