Agilent Technologies Agilent 33500 Series User Manual

MMEMory Subsystem
MMEMory:DOWNload:FNAMe <filename>
Creates or opens the specified filename prior to writing data to that file with MMEMory:DOWNload:DATA.
Parameter Typical Return
Any valid file name (none)
Write the word "Hello" to the file "\Myfile" on the internal flash file system:
MMEM:DOWN:FNAM "INT:\Myfile"MMEM:DOWN:DATA #15Hello
MMEMory:LOAD:ALL <filename>
MMEMory:STORe:ALL <filename>
Loads or saves a complete instrument setup, using a named file on the mass storage.
Parameter Typical Return
Any valid file name on current mass storage directory (none)
Store instrument setup to file named "completeSetup.all" on internal storage:
MMEM:STOR:ALL "INT:\completeSetup.all"
Load a complete instrument setup from the file in internal mass memory.
MMEM:LOAD:ALL "INT:\completeSetup.all"
l These commands allow you to duplicate instrument conditions from some previous time.
l This command loads the current instrument setup (such as is used by *SAV and *RCL).
l Instrument setup files used by these commands contain much more than the state files used by *SAV and *RCL.
They also contain stored states and arbitrary waveforms, GPIB and LAN parameters, number format, beep on/off,
display options, and help language.
l If the destination file exists, it is overwritten, unless marked as hidden or system.
MMEMory:LOAD:DATA[1|2] <filename>
Loads the specified arb segment(.arb/.barb) or arb sequence (.seq) file in INTERNAL or USB memory into volatile mem-
ory for the specified channel.
Parameter Typical Return
Any valid file name, as described below. (none)
Load an arbitrary waveform segment from the internal drive into volatile memory for channel 1 and selects it for
use.
MMEM:LOAD:DATA "Int:\Builtin\HAVERSINE.arb"
FUNC:ARB "Int:\Builtin\HAVERSINE.ARB"
256 Agilent 33500 Series Operating and Service Guide

Agilent Technologies Agilent 33500 Series Specifications

General

Brand	Agilent Technologies
Model	Agilent 33500 Series
Category	Inverter
Language	English