Safety and Regulatory Information
Do Not Modify the Instrument
Do not install substitute parts or perform any unauthorized modification to the product. Return the product to an Agi-
lent Sales and Service Office for service and repair to ensure that safety features are maintained.
In Case of Damage
Instruments that appear damaged or defective should be made inoperative and secured against unintended operation
until they can be repaired by qualified service personnel.
Unless otherwise noted in the specifications, this instrument or system is intended for indoor use in an installation cat-
egory II, pollution degree 2 environment per IEC 61010-1 and 664 respectively. It is designed to operate at a max-
imum relative humidity of 20% to 80% at 40 °C or less (non-condensing). This instrument or system is designed to
operate at altitudes up to 2000 meters, and at temperatures between 0 and 55 °C.
Technical Support
If you have questions about your shipment, or if you need information about warranty, service, or technical support,
contact Agilent Technologies.
Agilent 33500 Series Operating and Service Guide 7
To Next Page
Loading...
Need help?
General
