Chapter 2 37
2 Basic Operation
In the following sections, this chapter describes operations common to all Agilent PSG signal
generators:
• “Using Table Editors” on page 38
• “Using the User-Defined RF Output Power Limit (Option 1EU, or 521 only)” on page 40
• “Configuring a Continuous Wave RF Output” on page 42
• “Configuring a Swept RF Output” on page 45
• “Using Ramp Sweep (Option 007)” on page 49
• “Extending the Frequency Range” on page 59
• “Turning On a Modulation Format” on page 59
• “Applying a Modulation Format to the RF Output” on page 60
• “Using Data Storage Functions” on page 61
• “Using the Instrument State Registers” on page 63
• “Using Security Functions” on page 65
• “Enabling Options” on page 74
• “Using the Web Server” on page 75
To Next Page
Loading...
Need help?
General
