EasyManuals Logo
Home>Alcatel-Lucent>Switch>OS6900-X48C6

Alcatel-Lucent OS6900-X48C6 User Manual

Alcatel-Lucent OS6900-X48C6
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Your First Login Session Getting Started
page 2-10 OmniSwitch 6900 Hardware Users Guide June 2020
Unlocking Session Types
Security is a key feature on OmniSwitch 6900 switches. As described on page 2-8, when you access the
switch for the first time, you must use a direct console port connection. All other session types (Telnet,
FTP, WebView, and SNMP) are locked out until they are manually unlocked by the user.
The CLI command used to unlock session types is aaa authentication.
Note. When you unlock session types, you are granting switch access to non-local sessions (e.g., Telnet).
As a result, users who know the correct user login and password will have remote access to the switch. For
more information on switch security, refer to the OmniSwitch AOS Switch Management Guide.
Unlocking All Session Types
To unlock all session types, enter the following command syntax at the CLI prompt:
-> aaa authentication default local
Unlocking Specified Session Types
You can also unlock session types on a one-by-one basis. For example, to unlock Telnet sessions only,
enter the following command:
-> aaa authentication telnet local
To unlock WebView (HTTP) sessions only, enter the following command:
-> aaa authentication http local
You cannot specify more than one session type in a single command line. However, you can still unlock
multiple session types by using the aaa authentication command in succession. For example:
-> aaa authentication http local
-> aaa authentication telnet local
-> aaa authentication ftp local
Refer to the OmniSwitch CLI Reference Guide for complete aaa authentication command syntax options.
Changing the Login Password
Change the login password for admin user sessions by following the steps below:
1 Be sure that you have logged into the switch as user type admin (see “Logging In to the Switch” on
page 2-8).
2 Enter the keyword password and press Enter.
3 Enter your new password at the prompt.
Note. Be sure to remember or securely record all new passwords; overriding configured passwords on an
OmniSwitch is restricted.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OS6900-X48C6 and is the answer not in the manual?

Alcatel-Lucent OS6900-X48C6 Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelOS6900-X48C6
CategorySwitch
LanguageEnglish

Related product manuals