Allen-Bradley 22C-D038A103 User Manual

Rockwell Automation Publication 22C-UM001J-EN-E - January 2017 107
Programming and Parameters Chapter 3
d333 [Fault 7 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (d307
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to Chapter 4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d333 [Fault 7 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (d307 [Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 6 Code].
Refer to Chapter 4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d334 [Fault 8 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (d307 [Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 7 Code].
Refer to Chapter 4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d335 [Fault 9 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (d307 [Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 8 Code].
Refer to Chapter 4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d336 [Fault 10 Code] Related Parameter(s): A197
(With FRN 6.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters in the order they occur (d307
[Fault 1 Code] = the most recent fault).
Repetitive faults will only be recorded once. As faults occur, this parameter will be overwritten by [Fault 9 Code].
Refer to Chapter 4
for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d337 [Fault 4 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316
[Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr

Allen-Bradley 22C-D038A103 Specifications

General

Brand	Allen-Bradley
Model	22C-D038A103
Category	Controller
Language	English