74 Rockwell Automation Publication 8720MC-RM001K-EN-P - September 2018
Chapter 6 8720MC-RPS Startup and Operation
Operation Panel Features
The operation panel is used for setting parameters, monitoring operating
conditions, and resetting faults.
Figure 43 - Operation Panel Features
The operation panel has three main areas:
• There are five pushbutton switches that are used for selecting
monitoring information, setting parameters, and resetting faults
• The display consists of four seven-segment LEDs that display monitored
values, parameter numbers, parameter values, and error codes.
• Six status indicators that are used to display the operation status and the
units of the monitored values.
Display
When power is applied, the four-character seven-segment LED displays SELF
as the 8720MC-RPS unit performs the power-up self-diagnostics. When the
diagnostics are completed, the display indicates various monitor values,
parameter numbers, parameter values, and error codes.
RST
PRG
ENT
READY
FAULT
PROGRAM
Status Indicators
Display
Keypad
To Next Page
Loading...
Need help?
General
