Publication 2711P-UM001A-EN-P
4-20 Using Configuration Mode
Input Devices
The Input Devices screen lets you access screens to view and modify
settings for:
• Keyboard
• Keypad
• Mouse
• Touch Screen
Keyboard and Keypad Setup
The Keyboard and Keypad screen opens these screens:
• Key Repeat Settings
• Keyboard Settings
Key Repeat Settings for Attached Keyboard or PanelView Plus Keypad
The Key Repeat Settings configures settings for keys on the PanelView
Plus terminal or keys an attached keyboard.
Field Description Valid Values
Repeat Rate The number of times per second a key
repeats when you hold down a key.
0 - 30
The default is 0 or disabled
Repeat Delay The amount time that elapses before a key
repeats when you hold down a key.
200 ms
400 ms
600 ms
1 sec
1.5 sec
2 sec
2.5 sec
The following values are not
available settings for an
attached keyboard:
200ms, 1.5 sec, 2 sec, 2.5 sec
Terminal Settings
Input Devices
Keyboard or Keypad
To Next Page
Loading...
Need help?
General
