Publication 2711P-UM001A-EN-P
4-26 Using Configuration Mode
Startup Options
The Startup Options screen accesses the following screens to modify:
• RSView ME Station Startup
• Startup Tests
RSView ME Station Startup
The RSView Machine Station Startup screen specifies what action the
PanelView Plus terminal takes on startup:
• Do not start RSView ME Station
• Go to Configure Mode
• Run the Current Application
This option is available only if an application is loaded.
RSView ME Station will start up based on shortcuts in the Windows
Startup folder and whether an application is loaded.
Select the On Startup button to switch between Do not start RSView
ME, Go to Configure Mode, or Run the Current Application. Select the
button under the last two options to configure specific settings for
each mode.
Terminal Settings
Startup Options
RSView ME Station Startup
To Next Page
Loading...
Need help?
General
