24 Rockwell Automation Publication 750-PC108A-EN-P - April 2021
PowerFlex 755T Drives Configured to Order Program Product Information
Figure 20 - Frame 8 Configured Input Bay with Fuses, Bottom Entry:
Internal Components and Installation Connection Locations
Item Description
1 Exhaust hood with internal air filter
2 Control transformer
3 Terminal lugs to supply power to the drive input bay
4Fuse block
5Thermostat
6 Terminal block
7 AC line input protection fuses
8 Control relay
9 Terminal lugs for customer AC line input power. Connections must be made during installation.
10 Control power supply (24V DC)
11 Uninterruptible power supply (behind control power supply)
12 Battery
13
PE ground bar with ground clamps included. Terminating point to chassis ground for incoming AC line and
shield. Ground connections must be made during installation.
To Next Page
Loading...
Need help?
General
