26 Rockwell Automation Publication 750-PC108A-EN-P - April 2021
PowerFlex 755T Drives Configured to Order Program Product Information
Figure 22 - Frame 8 Configured Input Bay with Circuit Breaker, Bottom
Entry: Internal Components and Installation Connection Locations
Item Description
1 Exhaust hood with internal air filter
2 Control transformer
3Fuse block
4 Terminal block
5 Control relay
6 Terminal lugs to supply power to the drive input bay
7 AC line input protection circuit breaker
8 Terminal lugs for customer AC line input power. Connections must be made during installation.
9Thermostat
10 Control power supply (24V DC)
11 Uninterruptible power supply (behind control power supply)
12 Battery
13
PE ground bar with ground clamps included. Terminating point to chassis ground for incoming AC line and
shield. Ground connections must be made during installation.
To Next Page
Loading...
Need help?
General
