Allen-Bradley PowerFlex 755T Product Information, Original Instructions

Rockwell Automation Publication 750-PC108A-EN-P - April 2021 33
PowerFlex 755T Drives Configured to Order Program Product Information
Figure 30 - Frame 9 Configured Input Bay with Fuses, Bottom Entry: Internal Components and Installation
Connection Locations
Item Description
1 Exhaust hood with internal air filter
2Battery
3 Uninterruptible power supply (behind control power supply)
4 Control power supply (24V DC)
5Thermostat
6 Control relay
7 Control terminal blocks
8Fuse blocks
9
Customer AC line input connections using lug to L-bracket to busbar connection.
Connections must be made during installation.
10 Control transformer
11
PE ground bar with ground clamps included. Terminating point to chassis ground for
incoming AC line and shield. Ground connections must be made during installation.
12
PE ground bar splice connection hardware. Ground splice connection to drive PE ground bar
must be made during installation.
13 AC line input protection fuses
14 Cable support brackets - support and guide power cables that connect to the drive input bay
15
Terminals to supply power to drive input bay. Cables are connected to these terminals at the
factory. Cables must be connected to the drive during installation.
16
Configured bay control connectors for control connections to configured output bay (not
visible in this view, located behind bay frame). Connections must be made during installation.
1
2
3
4
5
6
7
8
9
10
13
12
11
16
15
14

Allen-Bradley PowerFlex 755T Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 755T
Category	Adapter
Language	English